Creative Woodworks & crafts 2000-04, страница 59

INSTRUCTIONS

Cut the patterns

Size the stock to the dimensions indicated in the Bill of Materials. Attach the patterns to the wood using spray adhesive. Bore blade entry holes and make the interior cuts first, then saw around the perimeters. Remove patterns and sand as needed.

Burn the grape vine

Transfer the grape vine pattern to the sides (A) and back (B) with graphite paper and the stylus. With the woodburning tool and universal tip, trace over the transferred lines. Note: transfer and burn the design into both the inner and outer surface of the side pieces.

Assembly

Glue the tenons on the back piece into the notches in the side pieces (see the Exploded View Drawing). Insert the 1/2" x 1/2" shelf slats (C) into the four mortises and two notches in the side pieces and glue in place. The four shelf slats should protrude 3" on either side.

a book featuring scroll saw and inlay patterns designed by Joe Paige Paisley, call Fox Chapel Publishing at (717) 560-4703. ^

Nntv-.h

Exploded View Drawing

The shelf slats should protrude approx. 3" from

Mortises

each side

Insert the slats into the mortises