Creative Woodworks & crafts 2001-04, страница 48

CAPE HATTERAS WALL PLAQUE

by Liz of Carolina Scrollworks sawn by Warren Kalitz

^'^IIJiiilteMfte! p:i' pMi hi <^! mm

INSTRUCTIONS

Make a copy of the pattern and adhere it to the wood with spray adhesive. As always, spray the paper, not the wood. Bore blade entry holes for all interior cuts with a small drill bit. Insert the blade and start cutting out the design, working from the center toward the outside. When done, remove the paper pattern from the wood. Rout the edges if desired, taking precautions where the lighthouse protrudes from the frame. Sand as necessary. Apply finish of choice. When dry, attach the hanger and take pride in a job well done! ^

SUPPLIES

Wood: red oak or hardwood of choice—one piece

1/2" x 6-3/4" x 8-1/4" (for the plaque) Tools: scroll saw and assorted blades; drill with bits; router with decorative edge bit (optional); palm sander; mini files Sandpaper, assorted grits Temporary-bond spray adhesive Finish of choice Sawtooth hanger