Creative Woodworks & crafts 2001-08, страница 16

The Pontiac Picnic 2000 Mini Clock No, 5

by Dan and Raymond WUckens of Wilckens Woodworking

INSTRUCTIONS

A special thanks to Kyle Wilckens for this original design.

Adhere the patterns to the appropriate stock using spray adhesive. Bore the 1-3/8"-Dia. hole for the clock movement in the upright. Bore blade entry holes and make all remaining cuts, beginning with the inside and working toward the perimeter. Drill a hole in the pendulum as indicated on the pattern for the pendulum shaft. Remove patterns and sand all pieces smooth.

Glue the upright in place on the base as indicated on the pattern. Apply finish of choice. Insert pendulum shaft into pendulum. Insert clock movement, attach pendulum, and enjoy! jr

SUPPLIES

Wood: hardwood of choice—one piece 3/4" x 5-1/2" x 9" (for the upright); contrasting wood of choice—one piece 1/2" x 3" x 12" (for the base), one piece 1/8" x 1-1/2" x 1-1/2" (for the pendulum) Tools: scroll saw with assorted blades; drill with bits including a

1-3/8"-Dia, Forstnerbit Temporary-bond spray adhesive Sandpaper, assorted grits Wood glue Finish of choice 1-7/16"-Dia. mini clock insert* Mini pendulum drive unit No. 2820*

* Available from WHdwood Designs. Dept. CWA. P.O. Box 67$. Richland Center Wl 53581. 1-800-470-9090; or visit their website at www. scrollsawing. com.

16 • Creative Woodworks S. Crafts August 2001