Creative Woodworks & crafts 2001-11, страница 29

SUPPLIES

Wood: cherry—one piece 1/4" x 10-1/4" x 13" (for the face), one piece 1/8" x 5-1/2" x 8" (for the spacer), one piece 1/8" x 5-1/2" x 8" (for the backer) Tools: scroll saw with No. 2 and No. 5 skip-tooth

blades; drill with small bits Temporary-bond spray adhesive Sandpaper, assorted grits Wood glue

Clear oil finish of choice Oval mirror (5-1/2" x 8") Picture hanger

sawn by Glenn Filgate

by John Nelson

I hate to admit it, but here is another Victorian project which I really like.

INSTRUCTIONS

Transfer the patterns to wood with temporary-: bond spray adhesive. Drill all blade entry \ holes and cut along pattern lines. Remove \ patterns and sand as needed. ; Referring to the Exploded View Drawing, | glue the spacer to the rear of the face. Insert Sthe mirror into the spacer. Glue the backer jto the rear of the spacer to retain the mirror. j Apply finish of choice according to manufacturer's instructions, jri

Exploded View Drawing

Backer

Install the mirror

Mirror

Glue the backer to the rear of the spacer to hold the mirror

Creative Woodworks S Crafts November 2D01 • 29