Creative Woodworks & crafts 2001-11, страница 8
by Dan and Raymond Wilckens of Wilckens Woodworking THE ROYAL INSTRUCTIONS Photocopy and transfer the patterns to the selected stock, adhering them with spray adhesive. Bore blade entry holes in the waste areas of each piece as well as the 1 -3/8"-Dia. hole to receive the clock movement in the upright piece. Saw the pieces to shape. Start with the interior cuts and finish by sawing around the perimeter. Thoroughly sand both pieces. Glue the upright in place on the base. Apply the desired finish, insert the clock movement into the 1-3/8"-Dia. hole, and enjoy! ^ SUPPLIES Wood: wood. of choice—one piece 1/2" x 4" x 7-1/2" {for the upright), one piece 1/2" x 2-1/4"' x 8-3/4" (for the base) Tools: scroll saw with assorted blades; drill with bits including a 1-3/8" Forstner bit Temporary-bond spray adhesive Sandpaper, assorted grits Wood glue Finish of choice 1 -7/16"-Dia. mini clock movement 8 • Creative Woodworks & Crafts November 2001 continued on page 18 |
