Creative Woodworks & crafts 2002-08, страница 12

Pattern Located in Full Size Pattern Section No. 2!

"" ; by Marilyn Carmin of Heartland Creations

Ito^s i

mmmmmm

mmW^&mm

■MRSI

i® 1 S I

INSTRUCTIONS

This pattern works well with an irregular edged, or slabbed, piece of wood. You can also take a dimensioned piece, cut it into an irregular shape, then burn the edges with a torch.

Copy the pattern and transfer it to the selected stock, attaching it with spray adhesive. Bore blade entry holes in the waste areas of the pattern and make all cuts.

Thoroughly sand the piece. Apply finish as directed on the can. When dry, cut and glue fabric of choice to the rear of the piece and attach the hanger. Hang and enjoy! [jri

SUPPLIES

Wood: wood of choice—one piece 1 /2" to 3/4" x 11" x 14" Note: the dimensions listed here are the minimum required for the pattern. If using stock with a live edge, the dimensions can vary.

Tools: scroll saw with No. 5 (12.5 TPI) blades; drill with No. 58 bit

Temporary-bond spray adhesive

Sandpaper, assorted grits

Clear spray finish of choice

Wood glue

Fabric of choice for backer Hanger of choice

I „ -^.o m i |