Creative Woodworks & crafts 2003-04, страница 24
[Pattern Located in Fill Size ; Pattern Section No. 1! % TRAFFIC ATA STANDSTILLby Clark Weeks SUPPLIES Wood: Baltic, birch plywood or wood of.choice—one piece. 1 /4"..x 4-1/4" x 35" (for the pattern piece); pine or wood of choice—one piece 3/4" x 1-1/2" x 35" (optional, for the stand) Tools: scroll saw wifn spiral blades; drill with bits; router with 1 /4" straight; bit (optional) Temporary-bond spray adhesive Sandpaper, assorted grits Clear oil finish of choice INSTRUCTIONS Copy the patterns and transfer them to the selected stock, attaching them with spray adhesive and making sure that the match lines adjoin. Note: the pattern has been separated into sections which will fit on 8-1/2" x 11" paper to make photocopying them easier. Bore blade entry holes in the waste areas and make all cuts, beginning with the inside and working toward the perimeter. If you desire, you can make a simple display stand for the piece by routing a l/4"-wide groove centered lengthwise in a piece of pine stock. Thoroughly sand the piece (or pieces) and apply two coats of clear finish to the wood, c^ mmmmmm^mmmmm SUPPLIES 1M-l M* x ::; : T^Kr^Xo'^^wM^5^1^^ bits ^^P^EmsK of fi ■w tpMBlue : Pantbrush Hotter INSTRUCTIONS Copy the pattern and transfer it to the stock selected for the overlay, attaching it with spray adhesive. Bore blade entry holes in the waste areas of the pattern. Make all interior cuts. Stack the overlay piece on top of the backer piece and saw around the perimeter. Thoroughly sand each piece. Apply two coats of clear finish to the overlay piece. Paint the backer piece Light Blue. When dry, glue the backer and overlay pieces together. Attach the hanger to the back of the piece. Hang and enjoy! [Pattern Located m Full Size k I Pattern Section No. 1! TUB A. D VENTUK BYTE Denise Green of Daeden Woodworks Creative Woodworks S. Crafts April 2003 • 19 |
