Creative Woodworks & crafts 2003-04, страница 6

SUPPLIES

Wood: Baltic birch plywood—one piece I /8" x 5" x 9" (for the overlay); pine or wood of choice—one piece 3/4" x 6" x 10" (for the backer) Tools: scroll saw with No. 2 and No, 5 fret

blades; drill with bits Temporary-bond spray adhesive Sandpaper, assorted grits M/'nwax Dark Walnut stain Clear finish of choice 1-7/16" clock movement of choice Hanger of choice

SUPPLIES

Wood: wood of choice—one piece 1/2" x 4-1/4" x 6-1/4" (for the upright), one piece 1/2" x 1-1/2" x 5-1/4" (for the base); Baltic birch plywood—one piece 1/8" x 4" x 4" (for the overlay) Tools: scroll saw with assorted blades; drill with bits

including l-3/8"-Dia. Forstner bit Temporary-bond spray adhesive Sandpaper, assorted grits Clear oil finish of choice Clock movement of choice

INSTRUCTIONS

Size the wood to the dimensions indicated in the supplies list. Make two copies of the pattern and transfer one to the stock selected for the upright and one to the Baltic birch plywood selected for the overlay, attaching them with spray adhesive. Bore blade entry holes in the waste areas of the overlay pattern as well as the l-3/8"-Dia. hole in the upright which will receive the clock movement. Saw the various components to shape.

Thoroughly sand the pieces. Glue the overlay in place on the upright. Center the upright on the base and glue it in place. Apply two coats of clear finish to the wood. When dry, insert the clock movement. »»

(Pattern Located in Full Sizek Pattern Section No. 1! I

I960 TRIUMPH

--I Patterns Located in Full Size\

[ Pattern Section No. 21 J

PLAY BALL! DESK CLOCK

INSTRUCTIONS

Size the stock to the dimensions indicated in the supplies list. Make two copies of the pattern and transfer them to the selected stock, attaching with spray adhesive. Bore blade entry holes in the waste areas of the overlay pattern as well as the l-3/8"-Dia. hole in the backer piece which will receive the clock movement. Make all cuts, beginning with the inside and working toward the perimeter.

Thoroughly sand each piece. Stain the backer piece as desired. Referring to the photograph as well as the pattern, glue the overlay onto the backer. Apply two coats of clear finish to the wood. When dry, attach the hanger to the back of the piece and insert the clock movement. Hang and enjoy!

Creative Woodworks S. Crafts April 2003 • 19

Billie "BJ" Holm