Creative Woodworks & crafts 2003-08, страница 10

GRIZZLY PATH

Pattern Located in Full Size Pattern Section No. 1!

jy Dave Sutton

SUPPLIES

Wood: hardwood of choice—one piece

1/4" x 10" xl 5" Tools: scroll saw with assorted blades;

drill with bits Sandpaper, assorted grits Temporary-bond spray adhesive Finish of choice

INSTRUCTIONS

Copy the pattern and transfer it to the selected stock, attaching it with spray adhesive. Bore blade entry holes in the waste areas of the pattern. Moke all cuts, beginning with the insiae and working toward the perimeter.

Remove the pattern and thoroughly sand the piece. Apply finish of choice to the wood and enjoy!

Pattern Located in Full Size Pattern Section No. 1!

Peanut Elephant Puzzle

by Robert Tayior

SUPPLIES

Wood: white pine or wood of choice—one piece 1" x 8" x 12" (for the frame and puzzle pieces); plywood or wood of choice—one piece 1 /8" x 12" x 8" (for the backer) Tools: scroll saw with reversed tooth blade No. 07; drill

with I /8"-Dia. bit Small clamps Wood glue Tack cloth

Sandpaper, assorted grits Temporary-bond spray adhesive Clear spray finish of choice Paintbrushes of choice Paints of choice

10 • Creative Woodworks 8. Crafts August 2003

INSTRUCTIONS

Copy the pal lorn and save original for later use. Affix the pattern to the 1" x 12" x 8" oiece of wood using spray adhesive. Using a 1/8-Dia. driil Dit, drill a hole as marked on the pattern. Make sure that your saw table is square to the blade. Cut the inside frame away from the puzzle. Release blade from saw to remove puzzle frame. Leaving the pat tern on, glue the bottom piece of wood to the puzzle frame and clamp together. Afte' the glue has dried, cut the outside of the frame. This will ensure both boards are cut exactly the same. Cut the inlerior p^:eces apart. Sand any rough edges and use a tack cloth to remove dust from pieces. Paint the puzzle pieces cs desired. Put the puzzle together and spray lightly with finish of choice to seal. ■