Creative Woodworks & crafts 2004-04, страница 41
Wood ce—one o o ooo 0 o o o Step 15. Loop four lengths of the leather through each of the three notches (so that e:ght lengths of "fringe" hang from each notch). Optional: Add beads to the -ringe. Step 16. Attach hcnger to back and enjoy! QOOOOO for questions concerning this project, *"'' send an SASE to: Marilyn Carmin, 4569 OOOOOOO NE 78fh P'" PorUand' OR 972 i 8. H Bead design SUPPLIES ■ood of chc piece 3/4' x 17' x 1 7"; contrasting wood—one piece 1 /4" x ' 7" x 17" Tools: scrol! saw with Nos. 2/0 and 5 blades; drii. with No. 58 bit Assorted clamps Temporary-bond spray adhesive Hot glue gun Glue and glue brush Sandpaper, assorted grits Clear spray finish 6 yards leather lace, 2mm-wide Smail piece of dark felt" Size 8 glass beads in two colors* Needle and thread* Assorted beads with at least 2mm hole (for lace)* Paint or stain of choice* Hanger of choice *Optional INSTRUCTIONS Step 1. Make two cop'es of the pattern. Step 2. Stack the -wood (1/4" on top) and hold with hot glue on the edges. Step 3. Using spray adhesive, put one pattern copy or the wood stack. Step 4. Drill holes at A and inside the three notches along the ouTer circle. Step 5. Using the No. 5 blade, cut the following in orcer: from A to B along the inside of the circle; inside the three notches; and around the outside of the circ e. Cutting these areas together ensures a perfect fit during assembly (later). Step 6. Separate the two woods. Do not remove the pattern. Using the No. 2/0 blade, finish cutting the circle and the styled eagle f'om the 1/4" wood. Step 7. Using the ou^er edges of the wood for careful alignment, glue the second partem or to the 3/4" wood. Step 8. Drili ho es and cut the realistic eagle only. Step 9. Sand c I pieces. Step 10. If more contrast is needed, either pairt or stain the circle and styled eag.e. Step 11. Spray all pieces with the clear finish. Step 12. Glue the 1/4" project piece to the 3/4" piece. Clamp until dry. Step 13. Apply severe1 more layers of cleor finish to the project. Step 14. Optional bead work: Cut nine triangles from felt to the size of the triang es in the outer circle. Sew the beads to the "'elt and glue the felt pieces inside ecch triangle. Arrow Fastener Co., Inc., 271 Mayhill Street, Saddle Brook, New Jersey 07663 c^/us Canada: Jardel Distributors, Inc., 6505 Metropolitan Blvd. East, Montreal, Quebec HIP 1X9 United Kingdom: Arrow Fastener (U.K.) Ltd., Unit 5 ZK Park, 23 Commerce Way, Croydon CRO 4ZS, Surrey www.arrowfastener.com Creative Woodworks S C-af:s Apr I 2004 • 41 |
