Creative Woodworks & crafts 2005-06, страница 40

continued from page 39 Assembly

Each base pattern has n dashed rectangular box on it that represents Ihe placement of the subject portion of each project on its base. Before you remove the pattern from the hoses, use at) cwl or small nail lo make a hole just inside the ends of the rectangular boxes (see Fig. 8). These holes will remain on the finish-sanded bases and will be used to align Ihe subject portion to its base.

Remove the patterns and finish sand all the projecl pieces. Apply a small amount of CA glue to the bottom edge of a subject portior of one of the projects. Set the subject portion on its base so it covers Ihe alignment holes made with the awl or small nail {see Fig. 9). Complete your project by applying the finish of your choice.

For questions concerning this project, send an SASE lo: John Po/hemus, 3000 Chorlefon Cf„ Waldorf, MD 20602; e-mcil: fretsawyer@wortdr.et.att.net jfj

Fig. 3. It is very likely the drilled holes may touch the sails. Fig. 4. Shave the curvature of the Bails to remove the holes.

Fig. 5. Bases cut with straight edge and Fig. 6. &fcart cutting the ship Fig. 7. Cut all the way around the ship base,

with random, wavy edge. base at the bow. exiting at the bow tc finish.

Fig. 8. Use an awl or small nail to make aligr merit Holes just inside the ends of the rectangular boxes.

Fig. 9. Glue the subject portion to Its base, covering the alignment holes.

4D • nreatiwi Mtt&MWi h &. Crate Jltie ?005