Creative Woodworks & crafts 2005-09, страница 45

Introduction

The sweetness and curiosity of puppies always make me smite. I painted the puppies in this project so they would appear more lifelike. A little stain and thinned paint can make oli the difference.

INSTRUCTIONS

Copy the pattern and save the original for later use. Sand the wood smooth and wipe clean with c tack cloth. Spray the bock of the pattern with a medium-light coat of the spray adhesive waif a few minutes until the glue feels tacky, then adhere the pattern to the center of the wood.

Draw a 2"-wide oval around the entire perimeter of the pattern, and cut along the traced line.

Drill the pilot holes for the design. Do NOT drill the circles on the butterfly wings. They will be painted later. Make oil the inside cuts using the no. 2 blade.

Tilt the table 4° degrees to the left. Using a No. 5 blade Push the center section back into place to check the fit. and cutting to the right.cut out the outer frame. Adjust if necessary. continued on page 46

Creative Woodworks fi. Crafts September 2005 • 57