Creative Woodworks & Crafts-050-1998-winter, страница 6

SUPPLIES

Wood: two pieces of Baltic birch plywood -

1/8" x 8" x 10" Tools: scroll saw; drill press with very small bit;

table saw or similar saw Temporary-bond spray adhesive Sandpaper, assorted grits X-ACTO knife or needle pick 8" x 10" piece of black felt cloth 8" x 10" picture frame

INSTRUCTIONS

Transfer the pattern, found in Full Size Pattern Section No. 1, to the wood with the spray adhesive,

matching the straight lines of the pattern to the edge of the wood.

With the small drill bit, bore a hole in the waste area of each cutout. Feed the scroll saw blade through the drill holes and cut along the lines. Repeat this process until all of the interior cuts are complete.

Peel the pattern from the wood, then sand the workpiece to remove any burrs. If necessary, clean up any cuts with an X-ACTO knife or needle pick.

Cut the backboard to size, then attach the felt with spray adhesive. Place the silhouette and then the covered backboard into the frame.

Hang your silhouette and enjoy the beauty of this captured moment with quiet reverence,