Popular Woodworking 2005-10 № 150, страница 30

Popular Woodworking 2005-10 № 150, страница 30

Tricks of the Trade

continued from page 26

A Dovetail Marking Knife

When transferring the shape of tails onto the pinboard of a dovetail joint, I like the accuracy gained by using a chisel-sharpened knife. As opposed to a double-beveled knife edge - which requires leaning the blade into the junction of the tailboard and pinboard - the flat side of a chisel-sharpened knife can be placed against the workpiece edge being traced, reducing the chance of error. However, it requires a right-handed and a left-handed knife. I decided to make a simple two-ended knife to do the job efficiently. The slim profile allows it to get into even the tightest spots.

For the blade blank, I cut a 5"-long piece of metal from a V!2 "-thick discarded industrial hacksaw blade I got from a small metalworking shop. However, any heavy-duty hacksaw blade will work. I ground it down to a width of 3/s", removing the teeth in the process, while try-

ing not to overheat the material. I radiused the ends on the grinder, then undercut behind each 3/8"-long cutting edge using the corner of the grinding wheel. I used emery cloth to break the sharp edges in the center for a more comfortable grip, but you could wrap it with electrical tape instead. After grinding a bevel on the same face of each end, I honed each bevel on the edges of waterstones.

John Bush Seattle, Washington

Cut out notches using edge of grinding wheel

Sharpen only one side

5" x approx. V32" thick

Cutting edge is 3/8" long

continued on page 30

You're Probably Just As Ambitious.

Whether you are a do-it-yourselfer, a professional woodworker or somewhere in between, you have a world full of projects in the home or in the shop that will be easier and more enjoyable to complete when you use quality clamps, bench vises and miter boxes/saws from the Adjustable Clamp Company. Look for them under the Jorgensen, Adjustable and Pony brand names wherever fine tools are sold.

Adjustable "Jorgervsgrv" Rbruf

Made in the USA by the Adjustable Clamp Co., 425 North Ashland Ave., Chicago, IL 60622,

www.adjustableclamp.com

CIRCLE NO. 127 ON FREE INFORMATION CARD.

CIRCLE NO. 167 ON FREE INFORMATION CARD.