Woodworker's Journal 1985-9-4, страница 53

through scrap stock that measures about Vi in. thick. Cut the hole in half and you'll have a gauge that's perfect for checking the tenon diameter you'll need.

Using a cabinet scraper for any length of time can leave your hands cut and sore from the sharp edges. To keep pain and suffering to a minimum, cover the exposed edges with binding slide. Binding slide, sometimes called binding channel, is the 11 in. long plastic strip used to bind loose pages in those vinyl "term paper" folders. You can get it at just about any stationery

Lengthening your router edge-guide with an auxiliary wood fence results in considerably more bearing surface, and that makes it easier to control the router. We find it especially helpful

when the router bit must run to a corner where only about half the edge-guide is in contact with the workpiece. The notch serves as clearance for operations that require the edge-guide to be close to the cutter.

Next time you drop a screw or other small object and can't find it, try laying a flashlight on the floor to help you. The light will cause the object to shine and cast a long shadow. You'll be surprised how easy it is to spot your lost item.

Greg Mihalevich, Jefferson City, Mo.

The Woodworker's Journal pays $25 for reader-submitted shop tips that are published. Send your ideas (including sketch if necessary) to: The Woodworker's Journal, P.O. Box 1629, New Milford, CT 06776, Attention: Shop Tip Editor. We redraw all sketches so they need only be clear and complete.

-Shop Tips=

I constructed a cut-off table for my table saw last year and added a feature that I feel makes this jig safer to use. I positioned two "stopblocks" on the front fence, one on eitheT side of the

blade slot. The blocks help remind me not to put my thumb over the slot, and they also keep my thumb from ac-cidently sliding over the slot when pushing the jig over the blade. This feature is not foolproof but it could prevent a serious cut, or worse yet, loss of a thumb.

William A. Matz, Dover, Del.

When turning tenons it's helpful to have a gauge that will enable you to quickly and accurately check your progress. Here's how to make one in short order. Select the drill bit that will be used to bore the mortise diameter you want, then use it to drill a hole

THE WOODWORKER'S MARKETPLACE

WOODWORKERS CATALOG

There are over 3,000 money-saving reasons why woodworkers rely on Constantine.

3,000 woodwork items-to help you Buiid-Reslore-Re pair-RelinistiI Over 200 different woods.., 150 veneers... 500 plans... cabinet hardware .

Re pair-Relinisti I Over 200 different woods

96 How-To Books. ..118 carving tools and chisels. 76 inlay designs.. .and lots more for One Slop, Right-Price Shopping without leaving home¹

116 Page Catalog-On ly $1.00 $2.00 refunded on 1st order.

CONSTANTINE Est «12

2044L Eastchester Road, Bronx, NY 10461

THIN HARDWOOD SIX PACKS

CLEAR — KILN DRIED - SURFACED A SIDES IN OUR KILNS — OUR 4 SIDED PLANER

Each pack contain* 6 square 'eel o! one thicknass one spec**. — pieces aie 2 to 4 'ee! long and3' j to 7 inches wtcje

To Order: Circle dollar amount above — add shipping and handling — check or money order only please

_Ma.no bergers hardwoods

Roule 4. Bon ^35. Seat end Virginia 24523

Virginia rpS'OSntS DiKjjc ^liit - i-a(es tj.

— It not satisfied, price refunded on return of wood — Name___

To Order: Circle dollar amount above — add shipping and handling — check or money order only please

_Ma.no bergers hardwoods

Roule 4. Bon ^35. Seat end Virginia 24523

Virginia rpS'OSntS DiKjjc ^liit - i-a(es tj.

— It not satisfied, price refunded on return of wood — Name___

•'Sir est GityfTown

State _

Amount Enclosed

Zip

CK

Other exact sizes available — please ask

Sleeveless DRUM SANDER

NO PRE-MADE SLEEVES TO BUY

ECONOMICAL — S<mplyout sandpaper 'rom standard size sheets UNIQUE — Twist o< key tightens sandpaper to drum SPONGE RUBBER backing insures long vtoai of sandpaper

1"*3" long. ., $13,50

r »3' long. . SI5.50

2V>" * 3' long . . S16QO

3" * 3" long $17,50

1 * arid 2 V*' Abovs $27.00 Abo^fl A Drums £55.00

514.50

...... S21 00

822 50 $25 50

....... S2? 50

Per Order Fqi 9 hi pplrvg

AVAILABLE WITH:

Vi" Boro with Vj * or v*" shaft I ICE nw-"^ <6-20 flH Thread excepl V*" x3"

uoc. VJM. Bore except x 3" and 2" x 3"

Drill Press Small Motor Lathe, Combo-Tools, Radial Saw, V*" Drill

Sand Ch«ch or M&wy Older to:

SINGLEY SPECIALTY CO. INC.

Simply cut to length and slide over the problem edges.

Bruce E. Montag, Astort, Penn.

J uly/August 1986

55