Woodworker's Journal 2008-32-2, страница 86

What's In Store

AKEDA:

877-387-6544

Black and Decker:

800-544-1

Bridge City Tool Works:

800-253-3332

Cali Bamboo:

888-788-2254

CMT:

888-268-2487

Gorilla Glue:

800-966-3458

Metabo:

800-638-2264

Osborne Wood Products

800-849-8876

Rockier:

800-279-4441

L.S. Starrett:

978-249-3551

Sfromer Faster v/itf! StiorterCiamp-tliw '•'''Statural Color-NoOy® ^fwIndw/OuUfew"*

No-Yellow Wood Glue

Gorilla Wood Glue is

waterbased, solvent-free and nontoxic and requires a clamp time of less than 30 minutes with full cure in 24 hours. It dries to a natural color: no yellowing. Gorilla Wood Glue can be applied in temperatures as low as 55° F. It's available in 8- and 18-ounce bottles,

priced at $3.99 and $5.99. ©-

HP-6v2 1/16" and 3/16" Dado Kits fit onto the body of Bridge City Tool Work's HP-6v2 Mini Multi-Plane and allow woodworkers to create dadoes and grooves with their hand plane. The kits sell for $159.

Osborne Wood Products is manufacturing a new 5"-diameter island leg called the Massive Savannah Leg (model #1496). The 1496 is 34^" long and is available in 10 wood types: alder, cherry, hard maple, hickory, mahogany, pine, red oak, red birch, soft maple and walnut. Prices per leg vary by wood type, from about $75 to about $146.

Measurements Without Math

The ProSite® CP5051-12 Combination Protractor

from L.S. Starrett Company provides no-math measuring for setting up miter cuts, compound cuts, supplemental angles and roof pitch references. An angle on the dial face indicates where a miter saw should be set for a cut. The tool includes a conversion table for cutting crown molding. The Combination Protractor sells for about $85

Rockler's Edge Routing Dust Port

attaches to any router baseplate that accepts a standard template guide bushing. Its 2¹/₂" O.D. dust port attaches to a shop vacuum or dust collection system and captures dust created when flush trimming or routing small decorative edges. It sells for $15.99.

CMT's Passage and Entry Door Set

(800.527.11) includes a bit specifically for cutting tenons, as well as cutters for long-grain profiles and coping the ends of rails.The Beefy Tenon Cutter produces tenons from 3/16" to 5/8" thick and up to 1Kb" long. Street price for the set is $299

Metabo's FSR200 Orbital Palm Sander features 11,000 orbits per minute at an orbit size of 1/16". It has a 1.8-amp motor, a rubber-coated gripping surface a washable filter for the ntegrated dust collection system. Price is $89.

L , wi ^Quik*^Link takes you directly to the web page on which these products appear! No navigation necessary ..

'11 ^^ IAI ^ just go to www.woodworkersjournal.com and click on the Quik-Link icon shown at left.

88

April 2008 Woodworker's Journal