Woodworker's Journal 2008-32-5, страница 90

Woodworker

contact info

What's In Store

CarveWright:

713-473-6572

Craftsman:

800-377-7414

Custom Service Hardware:

800-882-0009

Forrest Manufacturing:

800-733-7111

Laguna:

800-234-1976

Milwaukee:

800-729-3878

Smooth Starting Saw

Milwaukee's 6955-20 12" Sliding Dual Bevel

Miter Saw has an easy, dial-in fine adjustment for miter angles, which display on a digital readout. The constant power technology on the 15-amp, 3.3HP saw eliminates the jerking motion that can occur when a saw starts up. The 6955-20 is priced at $699.

Easy Repetitive Ripping on a Table Saw

The Thin Rip Table Saw Jig from Rockier lets you rip stock repetitively from the safe side of the blade without measuring. The jig fits in the miter track and locks in place with a twist knob; the rip fence and workpiece butt up to the jig, and you cut. For the next cut, move the fence so the workpiece touches the jig again. Price is $19.99.

Small, Safe Heat

The Little Buddy™ Indoor-Safe Propane Heater has a low-oxygen shut-off system and a tip-over safety shut-off. With 3,800 BTUs per hour, it can heat up to 100 square feet for

up to 51/2 hours on a 1 -lb. disposable propane cylinder. The product, from Mr. Heater® Inc., has a suggested price of $65.

Paint Without Touching

Each Painter's Pyramid holds up to 200 pounds of a project, so you can paint or finish all sides at once without repositioning. Its rounded, non-stick point makes minimal contact with the project, to eliminate touchups. It's impermeable to ail types of paints and stains.

A package of 10 sells for $6.99. •-

Mr. Heater:

800-251-0001

Painter's Pyramid:

804-426-4366

Rapid Tools:

905-336-0553

Rockier:

800-279-4441

RouterBits.com

888-811-7269

Sterling Publishing:

212-532-7160

From Computer to Carvings—

With the CarveWright Woodworking System from LHR Technologies, you can design a project on your computer and make it happen on the CarveWright, which routs, cuts, carves and joints.

It automatically selects the correct bits for your process. The 15" x 18" x 26" CarveWright is priced at $1,899.99.

Laguna has recently released a kit that makes their DriftMaster Fence System usable on other brands of band saws. The fence helps you make repeatable drift cuts, such as trimming veneer slices from hardwood, using the outside edge of the band saw blade. It costs $395.

j Quik-Link takes you directly to the web page on which these products appear! No navigation necessary ...

' just go to wwwMoodworkersjournal.com and click on the Quik-Link icon shown at left.

90

October 2008 Woodworker's Journal