Woodworker's Journal Contemporary-Medicine-Cabinet, страница 6

25. Epoxy the catch in place.

26. Lay out and mortise the hinges in place 1" from the top and bottom edge.

27. Close the door and mark the location of the strike plate.

28. Predrill the hole.

29. Screw the strike plate in place.

Step 5: Make the Cabinet Hanger

1. Cut two pieces of 3/4" by 1/8" aluminum to 25-1/2" long and eight pieces to 3/8" long.

2. Measure in 1" from each end and mark a point 3/16" from one edge.

3. Do the same thing at 6-3/8" and 3-7/8"

4. Mark a point in the center of each of the eight small pieces.

5. Bore a 1/8" hole at each of the points.

6. Countersink the holes on the long strips.

7. Place the 3/4" member against the back and mark the holes.

8. Predrill the holes.

9. Stack the 3/4" member on top of the 3/8" members and screw to the back of the cabinet.

10. Attach the mating member to the wall by screwing into the studs.

These plans were originally published in Volume 8, Issue 1 of The Woodworker S Journal (Jan./Feb. 1984, pages 38-39).