Woodworker's Journal Contemporary-Shelving-Unit, страница 4

23. Use the table or radial-arm saw to rip the 45-degree bevel on the front edge of the frame pieces.

24. Mortise the three hinges as shown to join each pair of frames.

25. Rip the edging strips from solid stock to a thickness of about 1/8", slightly thicker than necessary.

26. Cut the strips a little wider than the shelf thickness.

27. Use glue to attach the edging strips to the shelf edges.

28. Plane the edging thickness so the shelves fit well in the frames.

29. Plane or sand flush the ends of the edging so they are flush with the shelf surface.

30. Apply a coat of Deft Danish Oil to complete the project.

These plans were originally published in Volume 5, Issue 6 of The WoodworkerS Journal (Nov/Dec. 1981, pages 36-37).