Woodworker's Journal Napkin-Holder, страница 9

26. It's best to make the band saw cuts slightly on the waste side of the marked line.

27. Sand the edges can be sanded exactly to the line.

28. Final sand each half of the napkin holder.

29. Leave the bottom unfinished.

30. Apply two coats of penetrating oil to the remaining parts.

31. Use a sharp knife to trim the leather to the exact width of the base.

32. Glue the leather to the base (white or yellow glue works fine) to complete the project (see Figure 12).

These plans were originally published in Volume 16, Number 3 of The Woodworker's Journal (May/June 1992, pages 48-50).