BILL OF MATERIALS

Part Description Size in inches Quantity Wood of choice:*

A Front 1/4x7-5/8x12 1

B Back 1/4x7-5/8x12 1

C Sides 1/4x2-3/4x12 2

D Inner ends 1/4x2-3/4x5-1/2 2

E Outer ends 1/4x4-1/2x8-1/2 2

F Front/back legs 1/4x1-1/4x7-1/2 2

G Side legs 1/4x1-1/4x3-1/4 2

H Base 1/4x3-1/4x6 1

I Front braces 1/4x7/8x2-1/4 4

J Crest 1/4x2-1/4x6 1

K Crest braces 1/4x1x2 2

L Insert 1/4 x 2-7/8 x 5-1/4 1

* Special wood package available - chose from 3 different hardwoods. See page 12 for details.

Designed by Dan and Raymond Wilckens of Wilckens Woodworking

INSTRUCTIONS

Shape the parts

Cut your stock to the sizes indicated in the Bill of Materials. Copy and attach the patterns to the selected wood with temporary-bond spray adhesive.

With a small drill bit, bore blade entry holes in the waste areas of each cutout, then drill a shaft clearance hole of the appropriate diameter at the clock location.

Feed the scroll saw blade through the small holes and make all interior cuts first. For the exterior cuts, cut in from the edge or drill a small

Loc. of the base and side legs

Make sure this assembly is square and flush

Fig. 1. Glue the side legs to the base. Then attach the front/back legs (F)

loc. of the legs

Front view

BLOSSER CLOCK