Creative Woodworks & crafts 1997-08, страница 11

Noah's Ark #202

Barn Dance #201

These patterns are truly unique! A touch of the hand sets their focal point into motion

Bucking Bronco #203

Joyful Noise #301

A parade of children, along with their musical instruments, march across this 3-D picture

School Days #302

Children at play in front of a one room schoolhouse, remind us of those carefree days

isil®siii8

Sweetheart Frame #401

This project will delightthe eye whether it frames a mirror or your favorite picture

reg. $5.95 Add $1.00 per pattern for S&H with $4.00 maximum

HEARTLAND CREATIONS

P.O. BOX 191 YACOLT, WA 98675 or call (360) 686-3133

Visa, MasterCard, Check or Money Order

SUPPLIES

Tools: saw of choice for ripping and cross cutting; scroll saw; drill press; drill with bits including a small bit for start holes and one for the quartz movement shaft; planer; belt and hand held sander Temporary-bond spray adhesive Sandpaper, assorted grits X-ACTO knife and/or needle pick Clamps Wood glue Oil finish of choice Double-sided tape Two small hinges Small door pull

Quartz movement and either 4-1/2" or 5-1/8" bezel*

*Available from Steebar Corp., P.O. Box 980-WC-8, Andover, NJ 07821-0980, (201) 383-1026.

For more original scroll saw patterns, contact Wilckens Woodworking at P.O. Box 520496, Independence, MO 64052.

hole just outside the exterior line.

Remove patterns and sand the pieces with a belt or hand held sander. Remove any burrs and clean up any cuts with an X-ACTO knife or needle pick.

Assembly

Referring to the Fig. drawings on page 12, assemble the clock case.

Final assembly

Attach small hinges to the back of the clock and the back of the door. Tip: put a small piece of double-sided tape on the back side of the hinges to hold them in place while drilling small pilot holes for screws. The small drill bit used for the cutouts should work here. After the holes have been drilled, remove the tape.

Attach the small door pull to the back side of the door, and hinge it to the rear of the case. Apply oil finish of choice. When thoroughly dry, install the clock movement and bezel.

Place the Blosser Clock on your mantle to view as you enjoy the long days of summer! ^

Continued on page on 12