Creative Woodworks & crafts 1999-01, страница 50

m fjg

continued on page 52

V Patterns

Located in ' Full Size Pattern i Section ; k No. 1! A

SUPPLIES

bill of materials

Tools: scroll saw with No. 5 blades: table saw; drill with bits including a 2-3/8"-Dia. Forstner bit; router with 1/4"-Dia. roundover bit (optional) . Temporary-bond spray adhesive Sandpaper, assorted grits Craft knife Wood glue Oil finish of choice Spray lacquer (optional) Two sawtooth hangers 2-3/4"-Dia, quartz clock movement*

* Available from The Berry Basket. P.O. Box 925, Centralia, WA 98531, (800) 206-9009.

Part Description

Walnut:

A Back

B Overlay

C Name Base

Quantity

Size in inches

Shield Crest

Name Banner Lion Figures

INSTRUCTIONS

Size and saw the pieces

Size the pieces as indicated in the Bill of Materials. Sand as necessary. Rout the edges of the back (A) if desired using a 1/4" roundover bit (see Fig. 1). Next, adhere the patterns, found in Full Size Pattern Section No. 1, to the appropriate pieces with temporary-bond spray adhesive. Drill holes for the interior cuts, then saw the pieces to shape following the solid lines (see Fig. 2). Note: bore the 2-3/8"-Dia. hole for the clock insert in both the shield (D) and overlay (B) prior to cutting out the design (see Fig. 3).

Spell, sand, and assemble

Using the letter patterns (also found in Full Size Pattern Section No. 1), cut out the letters for your name with the craft knife and arrange them along the top of the name base pattern (C). Next, adhere the letters