Creative Woodworks & crafts 1999-04, страница 10

by Don Kirkham

/ Patterns ^ Located in Full Size Pattern Section V No. 1! A

instructions

Transfer the pattern to the walnut stock. Bore blade entry holes in the waste areas, thread the saw blade through these holes, and make the inside cuts. Once all inside cuts have been made, saw around the outside edge of the pattern. Saw the inlay patterns from the maple. Sand all pieces. Glue the inlay pieces in place as indicated on the pattern. Apply finish of choice according to manufacturer's instructions. Once finish is dry, hang and enjoy! 6f|

supplies

Wood: walnut—one piece 1/4" x 7-1/8" x 6-7/8

maple—one piece 1/4" x 5-1/5" x 1" Tools: scroll saw with assorted blades; drill

with bits Temporary-bond spray adhesive Sandpaper assorted grits Wood glue Finish of choice

Creative Woodworks & Grafts