Creative Woodworks & crafts 1999-04, страница 14

8H81®

1 Span | fM

instructions

Transfer the patterns for the right and left side pieces and the back piece to the 5/8"-thick stock. Bore blade entry holes in the waste areas, thread the No. 5 blade through the holes, and cut.

Transfer the retainer patterns on the edge of the 1^:'-thick stock. Using a No. 9 blade, cut all four pieces. Bore the eight 3/16"-Dia. holes where indicated on the pattern. Sand project as needed. Spray with the clear finish and attach the sawtooth hangers to the back as indicated on the pattern.

Insert the brass bolts from the back through the drilled holes in the back piece and left and right pieces. Tighten a nut onto each bolt (see the Cutaway View Drawing). Place a retainer onto the bolt with the thick edge down. Tighten each retainer with a knurled knob. Hang on the wall with your favorite quilt, jjfj

Cutaway View Drawing

Sawtooth hanger

Round head brass bolt

Knurled knob

Retainer