Creative Woodworks & crafts 1999-04, страница 28

by Sheila Poihemus

W Patterns

Located in " Full Size Pattern

L Section j No. 1! A

instructions

Transfer the patterns, found in Full Size Pattern Section No. 1, and cut out the castle (A), drawbridge (D), and serpent (E). Drill holes in the drawbridge and castle where indicated.

Set your saw table to about 5 degrees to bevel the edges and cut out the center piece of the land (B) as well as the inside edge of the outer piece. Glue the outer piece to the base (C) as shown in Fig. 1. When the glue has set, and with your saw table still set at 5 degrees, cut around the outer edge. Glue the center piece inside the water area.

Glue the serpent (E) in place. Fill in the water area with the Easy Water per the manufacturer's instructions. Glue the castle (A) to the center piece of the land (see Fig. 2). Attach the drawbridge with string.*!

Tools: scroll saw with assorted blades; drill with

assorted bits; bevel Temporary-bond spray adhesive Carpenter's glue Paint of choice (optional) Easy Water* String

*Easy Water is a hobby compound manufactured by Woodland Scenics and retails for $7.95 plus shipping and handling. Contact: All Aboard, 1451 Rt. 46, Ledgewood, NJ 07852; (973) 584-2884.

bill of materials

Part Description

Baltic birch plywood: A Castle B Land C Base D Drawbridge Walnut: E Serpent

Size in inches

Quantity