Creative Woodworks & crafts 1999-10, страница 10

sidebar). Do not trim the backer board yet. This extra area wiJI be helpful when pouring the finish to catch the overflow. Follow the manufacturer's instructions contained with the finishing product. Allow to dry for 24 hours, then trim away the waste area of the backer board and fit the finished panel into the frame. Display with pride, jrj

continued from page 8

polyurethanes dry with an amber color. The water-based polyurethanes require many more coats and sanding. Needless to say, I immediately lost interest. The brush-on lacquers are highly flammable and produce toxic fumes that are unbearable in a home workshop. I've had good luck with Envirotex Lite pour-on high gloss finish (see accompanying

to ipw.t' ••

Fig. Disc *' ■; piece from trie panJ

and keep the inlay piece.

fi0- 4. Gliisth- iilyy'pfcsf- in pi<aee

SEE MORE INDIGO BUNTING MARQUETRY\ TECHNIQUES ON PAGE 12

Fig. 1. Transfer the registration marks to the panel. Rg. 2- Attach the inlay piece to the underside of the panel.

Fig. 5. Once all inlay pieces are in place, the panel can be sanded.