Creative Woodworks & crafts 2000-06, страница 12

SUPPLIES

Wood: wood of choice—one piece 3/4" x 11" x 11' Tools: scroll saw with assorted blades; drill with

1/8"-Dia. bit Temporary-bond spray adhesive Sandpaper, assorted grits Finish of choice

r<\mmtB's&:ie

INSTRUCTIONS

Attach the pattern using spray adhesive and bore blade entry holes for inside cuts. Make all cuts except the relief cut. Set the saw table to 3 degrees to the right and cut ; following the directional arrow. Note: if tilting the table to : {the left, remember to cut in the opposite direction of the : arrow. Remove the pattern and sand as needed. Apply a small bead of glue to the edge of the relief bunny and push into place. Apply finish of choice according to manufacturer's instructions and allow to dry. jjyp