Creative Woodworks & crafts 2001-04, страница 8

EAGLE DIAMOND WALL CLOCK

by Vernon Brown of The Wooden Teddy Bear, Inc.

Creative Woodworks & Crafts

supplies iflfp^r

Wood: hardwood of choice (preferably a \ g

tight grain)—one piece 3/4" x 10-1/2" x y

13-1/4" ' - \

Tools: scroll saw with Nos. 5 and 7 reverse tooth or crown tooth blades (for inside cuts) V-. and No. 12 reverse tooth or crown tooth blades (for outside cuts): drill with bits, including a %

1/16"-Dia. and a 2-3/8"-Dia. Forstner bit Temporary-bond spray adhesive (fine mist; e.g.,

3M #77) 1|j*

Sandpaper, fine to extra fine grit Hfcj;

2-3/4" insert (clock, thermometer, etc.)* Clear finish of choice Sawtooth hanger (2" wide) Colored paper or felt (optional) Wood glue (optional)

*lnserts as well as twenty more Diamond Clock patterns are available from The Wooden Teddy Bear, Inc. Call (888) 762-9149 or visit their website at www. woodenteddybearonline. com

_v ^ujj instructions

>4/ r-Mgfmmnere pattern to the wood with spray 5 y/ / .-^^^hesive. Using the 2-3/8"-Dta. Forstner 'bit, bore the hole for the insert of choice, this hole should be made prior to any H^^%ther_:cutting. Drill 1/16"-Dla. holes (or smaller f;j ; im^'-on some cutouts) In all areas to be cut. Make all inside cuts using the Nos. 5 and 7 blades jpgBPltand ail outside cuts using the No. 12 blades.

Note; complete all -internal cuts before making > the outside cuts, as this will give a much more sta-j||f ble'pi^e ofjwood wrth \prach to work. . "--v> Gently sand the surfaces and edges as required, p; Apply finish Of choice. If backing is desired, lightly glue colored paper or felt to the back of the project, ifflbs hole open Install your chosen 2*3/4" insert. Attach sawtooth hanger arid enjoy! * J ,