Creative Woodworks & crafts 2001-11, страница 48

continued from page 46

Fig. 1. Attach the pattern to the walnut Fig. 2. As you cut, remove waste wood Fig. 3. Once the perimeter has been cut, stock, then tape that to the backer. periodically and retape the pieces togeth- cut the two pieces apart.

er using clear tape.

Fig. 6. Periodically sand the "fuzzies" off the back of the workpiece as you are sawing.

Fig, 4. Bore small blade entry holes.

Saw out the pattern.

Fig, 6>. Wipe off the excess oil.

Fig. 7. Use a small brush to apply Watco Danish oil to the pieces.

Fig. 9. Glue the overlay to the backer.

Fig. 10. Attach a sawtooth hanger to the back.

48 • Creative Woodworks-& Crafts November 2001