Creative Woodworks & crafts 2003-01, страница 12
SUPPLIES Wood: burl, natural round, or wood of choice- one piece 3/4" x 7" x 7" Tools: scroll saw with assorted blades; drill with No. 58 bit Temporary-bond spray adhesive Sandpaper, assorted grits Clear oil finish of choice Backer material of choice (7" x 7") Hanger of choice SUPPLIES Wood: hardwood of choice—one piece 1/2" x 4-1/2" x 8-1 /2" (for the upright), one piece 1/2" x 2" x 5" (for the base) Tools; scroll saw with assorted blades; drill with bits including 1 ~3/8"--Dio Forstner bit Temporary-bond spray adhesive Wood glue Sandpaper, assorted grits Clear oil finish of choice Mini clock movement of choice Patterns Located in Full Size Pattern Section No. 1! sii»®if iiciciifPattern Located in Full Size Pattern Section No. 2! by Marilyn Carmin of Heartland Creations by Billie "BJ" Holm INSTRUCTIONS Copy the pattern and transfer it to the selected stock, attaching it with spray adhesive. Bore blade entry holes in the waste areas of the pattern. Saw the pattern to shape, beginning with the smaller cuts and working toward the larger. Thoroughly sand the piece. Apply two coats of clear finish to the wood. When dry, trim the backer material to fit your silhouette and glue it in place, attach the hanger to the back of the piece. Hang and enjoy! ^ INSTRUCTIONS Copy the upright pattern and transfer it to the selected stock, attaching it with spray adhesive. Bore blade entry holes in the waste areas of the pattern. Make all cuts, bore the 1-3/8"-Dia. hole to receive the clock movement, and remove the pattern. Size the stock for the base and round the corners. Thoroughly sand the pieces. Glue the upright centered on the base. Apply two coats of clear finish to the wood. When dry, insert the clock movement, jft Creative Woodworks S. Crafts January 2003 • 25 |
