Creative Woodworks & crafts 2003-06, страница 14
Love Plate ; Pattern Located in Full Size Pattern Section No. 21 by Joseph Preston SUPPLIES Wood: plywood of choice—one piece 1/4" x 10-3/4" x 10-3/4" (for the plate rim and center piece), one piece 1/8" x 9-1/2" x 9-1/2" (for the rim backer) Tools: scroll saw with No. 2 reverse tooth blades and zero clearance cover on table; drill with I /32"-Dia. bit Temporary-bond spray adhesive Sandpaper, assorted grits Poster board, color of choice 8-1 /2" x 8-1/2" Stain of choice Finish of choice Hanger of choice Outer rim piece INSTRUCTIONS Make two copies of the pattern and transfer one to the stock selected for the outer rim and center pieces and one to the piece which will be cut into the rim backer. Attach the patterns with spray adhesive. Bore blade entry holes in the waste areas and make all cuts, beginning with the inside and working Glue the backer toward the perimeter. Save the interior cutouts of the letters. Thoroughly t0 the rear of sand the pieces and stain as desired. the rim backer Referring to the Exploded View Drawing, assemble the pieces. Apply finish of choice to the wood. When dry, cut the poster board to shape and attach it to the back. Affix hanger of choice. Hang and enjoyljg Glue the rim backer to the rear of the rim piece Rim backer The center piece is cut from the center of the outer rim piece Center piece Exploded View Drawing SUPPLIES Wood: Baltic birch plywood—one piece J/4" x 9-1/2" x 8" Toots: scroll saw with assorted blades; drill.with bits Sandpaper, assorted grits Temporary-bond spray adhesive Finish of choice INSTRUCTIONS Copy the pattern and transfer it to the selected stock, attaching it with spray adhesive. Bore blade entry holes in the waste areas of the pattern. Make all cuts, beginning with the inside and working toward the perimeter. Thoroughly sand the piece. Apply finish of choice to the wood and enjoy! SPORTS PLAQUE Pattern Located in FullSize]; Pattern Section No. 2! | Denise Green of Daeden Woodworks |
