Creative Woodworks & crafts 2003-06, страница 16

SUPPLIES

Wood: Finnish, or Baltic birch plywood, or hardwood of choice—one piece 1/4" x 10-1/2" x 10-1/2" Tools: scroll saw with No. 2 and No. 20

reverse tooth blades; drill with bits Temporary-bond spray adhesive Sandpaper, assorted grits Frame of choice, (optional) Backer board, 1/16" or 1/32" ply, sized to

fit frame (optional) Sanding sealer and clear wipe-on polyurefhane, or finish of choice

SUPPLIES

Wood: Baltic birch plywood—one. piece 1 /4" x 4-3/4" x 28" (for the door topper); p/rte—one piece 1/2" x 3/4' x 30-1/4" (optional, for the base) Tools: scroll saw with assorted blades; drill with bits;

router with l/4"-Dia. straight bit Temporary-bond spray adhesive Sandpaper, assorted grits Wood glue

Flat black paint or finish of choice

------------------- ---------------------------- --- ----------Pattern Located in Fuli Size

i ga sK ga m W Pattern Section No. 1! j

Madame Butterfly

'■■■■ —- -v.* ■'■**-■/■"■■■———■ ■■ '..'■■.' ■■V■ .'.-,■.>' ■ ■¹ .'...v.-. ■ ■ .-.-;. - ".v. ■'.'.- -----. .■ . ■. '.v■ ■ ■ ■■■.v. - .— ■ 'v.

by David Wedoski

-------------------------------- --------------------------------------------------Patterns Located in Full Size]

I Pattern Section No. 2!_ |

BUILDING A HOUSE DOOR TOPPER

by Clark Weeks

INSTRUCTIONS

Copy the pattern and transfer it to the selected stock, attaching it with spray adhesive. Bore blade entry holes in the waste areas of the pattern. Make all cuts, beginning with the inside and working toward the perimeter.

Thoroughly sand the piece. If desired, you can make a bese for your door topoer by simply routing a 1/4"-deep x 1 /4"-wide groove lengthwise in a piece of pine. The door topper can then be glueo into the groove. Paint the piece Black or apo'y finish of choice to the wood. Hang ana enjoy: fe

INSTRUCTIONS

Copy the pattern and Iransfer it to the selected stock, attaching it with spray adhesive. Bore blade entry holes in I he waste areas o! :he pattern. Make all cuts, beginning with the inside end working loward the perimeter.

Thoroughly sand the piece. Apply finish of choice to The wood. Frame as desired or simply hang and enjoy!