Creative Woodworks & crafts 2004-03, страница 34
Patterns Located in Full Size Pattern Section No. 2 SUPPLIES Wood: wood of choice — two pieces approximately 1/4" thick x 9-1/2" x-12" (can be different types of wood or the same type finished differently); Backer of choice [bristol board or thin plywood), approx. 9" x 1T' Tools: scroll saw with blade size of choice; drill with bit of choice Temporary-bond spray-adhesive Masking tape Sandpaper, assorted grit Wood glue finish of choice Hanger of choice 111 INSTRUCTIONS Photocopy both the owl and leaf overlay patterns. Attach the leaf overlay pattern to the selected stock . : with spray adhesive. Next, place the leaf overlay stock (with pattern attached) over the second piece of stock and tape together on all edges. Cut the outer border of both pieces simultaneously. Separate the pieces and attach the owl pattern to selected stock with spray adhesive. Drill holes in waste areas of patterns. Make cuts in all smaller areas first. Thoroughly sand both pieces. Apply finish of choice. Let dry thoroughly. Glue stock together. Cut backer and glue to back. When dry, attach the hanger. Hang and enjoy. Send questions concerning this project to: Demise Green do Daeden Woodworks, RR1, 384870 Salford Road, Burgessville, Ontario, Canada NO J J CO. Email: daedenwoodworks @hot mail. com 14 • Creative Woodworks S. Crafts March 2004 |
