Creative Woodworks & crafts 2005-04, страница 18

IB * Creative iA&xxJw rtrs & Oralis Aarii 2005

Tracing the Inside of the frame

Align the frames to the lids and trace the inside of the frames.

Rectangle glued to lid bottom

Use these traced lines to position end glue the rectangles to the lids.

Gluing on the -frame piece Align and glue the franc piece to the top of the box.

5 tacked plywood layers

Stack up alternating A and B plywocd layers lor each box with the layer having the pens and pencil outlines on top. Now that they are in order, apply glue between the layers and carefully align them with each other. I prefer to use Cyanoacrylate glue |CA glue] to bypess clamping and waiting for wood glue to set. Drill blade access holes within the outlines of the pens and pencil and cut out the cavity.

Check that pens and pencil fit cavities

Check to be sure the pens and pencils fit the cavities property. Remove the patterns and finish sand them. Apply glue to the bottom of the pieces with the cavities, align, and attach them to their hardwood bottom pieces.

Remove the patterns from the four pieces saved eorlier and finish sand them. The rectangular centers will be glued to the underside of the hardwood lids, helping tc align the lids to the boxes.