Creative Woodworks & crafts-111-2005-Holiday, страница 66

Copy or trace the iamb pattern. Using adhesive spray, attach the pattern to the iamb piece, aligning it with the cut edge.

Starting from the top, and in one cut, separate the lion from the lamb Following the pattern line.

Cut apart all the lamb pieces, and rub mineral spirits over the pattern pieces for easy removal. Contour and finish sand ali lamb parts. Brush the ebonizing solution onto the pieces marked E on the pattern. Be careful that the pieces treated with the ebonizing solution do not come in contact with those that haven't because the solution can bleed. Set the pieces aside to dry overnight.

Cut around the glued spots to separate the lion scrap from the lamb stock

i flfl • Creative Woodworks & Crafts Holiday S005

Cut apart the lion pieces and remove all pattern pieces. Using all pieces marked L on the pattern as templates, trace them onto the aspen and cut and fit them to the iion. Contour and firish sand all the lion pieces. Brush the ebonizing solution onto the lion's pupils, and set aside to dry overnight.

continued from page 65