Popular Woodworking 2006-12 № 159, страница 52
With a 1 "-wide chisel, define the second, opposite Remove the waste wood with a chisel but stay knife walls. Then use the saw to cut down to just slightly above the final depth. above the depth line. Use a hand router to flatten the bottom of the recesses. If the stop overhangs, remove the excess with a small saw. If it falls short of the outside edge, shave off some of the width of the stop with a plane, and tap it further into the recess. Use a marking gauge set to to 23/8" to mark a parallel line along the length of the main baseboard. Apply glue to the underside of the fence platform and position it against the gauge line. Clamp the fence platform to the main base- nate to the main baseboard. Finally, screw the underside stops to the main board using protective cauls to prevent damage to the shooting board. baseboard. For added wear resistance and to reduce friction, glue a piece of plastic lami- popularwoodworking.com i 69 |
