Popular Woodworking 2007-12 № 166, страница 35

Popular Woodworking 2007-12 № 166, страница 35

Proper crosscutting. Don't use the rip fence as a stop block for crosscutting. The better way to make repetitive crosscuts on a table saw is with a sled and a double-clamped stop block.

Clamp it twice. A loose stop block will spoil your accuracy and cause you to lose control of your cut. Whenever possible, use two clamps on your stop blocks, such as this stop on my miter saw's fence.

the fence and blade and can be thrown back toward the user. This will create a dangerous kickback.

3. When stops are used, the wood captured between the stop and the blade must be held securely. For example, on a chop saw the wood between the stop and the blade must be held firm and still until the blade comes to a complete stop in the down position.

4. Be aware of the rotation of cutters, bits or blades when choosing the location of a stop. For example, whenever using stops on the drill press, you need to remember that the chuck spins in a clockwise direction so the pulling or kicking force will be in that same direction.

5. Whenever possible, stops should

56 ■ Popular Woodworking December 2007

be double-clamped into place to prevent movement of the stop and to make sure it doesn't come loose during operations.

6. Stops must be designed so that sawdust does not build up and interfere with the accurate or safe use of the stop.

7. Stops can also be used to prevent wood from being kicked back, such as the stops used on a jointer when cutting tapered legs. These types of stops must always be tight and can be used as a way to prevent kickback when the cutter fully engages the wood. PW

Marc Adams is the founder of the Marc Adams School of Woodworking in Franklin, Ind., one of the largest woodworking schools in the world. For details, visit marcadams.com or call 317535-4013.

Work with More Accuracy (and Safety) in your Woodshop

The best way to use your machines is rarely explained in the manual. Find out how to operate machines to get accurate results without sacrificing safety.

• Part 2 Practical Safety Devices

Choose the right guards, push sticks and hold-downs to work safely.

IN FUTURE ISSUES • Part 3 Power Jointers ^

Most people use their ij

jointers incorrectly, j§|

resulting in warped stock and unsafe operations.

• Part 4 Miter Saw

Stock miter saws are neither accurate or safe. Here's how to fix both problems.

• Part 5 Band Saws

Band saws are safe if used correctly; however it's easy to step over the line and get bit.

• Part 6 Planers

Powered planers seem like safe machines until you start testing their limits.

• Part 7 Table Saws

The fundamental skills to get good (and safe) results with the most important woodworking machine.

IN PAST ISSUES • Part 1 Learn the Skills to be Safe

The groundwork for a lifetime of accurate woodworking is to understand your tools.

■ML,

""'UoWn |