87, страница 37
5. Table Saw Stand. Benchtop table saws gain capability with quick setup and an outfeed support. 6. Router Table Stand. Create a portable router table and maximize shop space by mounting a router to the table saw outfeed support. dual-function Outfeed Table With this platform and outfeed table, I can use my benchtop table saw anywhere. And to make it even more useful, I mounted a router to the outfeed support. Table Saw Platform. The base for the benchtop table saw is just a piece of %" plywood with cleats on the bottom like the other bases on page 36. You'll have to size your platform 4" larger than the base of your saw to accommodate the four L-shaped blocks in each corner (see opposite page). I screwed the blocks in place then rounded the comers with a 1" radius. Outfeed Support. The outfeed support shown on the right doubles as a router table. The key is to make the final height the same as the height of your saw table. Detail 'a' on the right shows how the outfeed support is just a bottom and top piece connected by a pair of end and back pieces. To mount your router, use your router's base plate as a template for locating the screw holes. NOTE: all parts are plywood NOTE: position L-SHAPED BLOCKS TO FIT YOUR SAW (SEE DETAIL 'a' IN BOTTOM LEFT PHOTO ON PAGE 36) NOTE: HEIGHT OF OUTFEED TABLE SHOULD MATCH HEIGHT OF SAW TABLE #3 x 1!4" Fh woodscrew LAMINATE TOP (12 x 30Vz) USE ROUTER BASE AS TEMPLATE FOR DRILLING MOUNTING |
