Woodworker's Journal 101-Projects-for-Woodworkers, страница 168




Woodworker

The lop frame is made of %" stock, and the corners are joined with mitered half laps as shown in Detail C. Sand the frame parts carefully before assembly. Glue the corner joints and double-check for squareness before the glue sets. The frame is trimmed with a half-round molding, mitered at the corners, which provides a nice decorative touch and conceals the end grain of the joints. Cut and fit the small door to the apron opening. Mount the door with small brass hinges and fasten a small knob and turnbutton.

The Va" plate glass should be cut for an easy fit within the frame. It rests on four small strips H that are glued to the frame. These strips are mitered at the corners.

Stain the table to suit and finish with at least

three coats of varnish, well rubbed with 4/0 steel wool between coats. A final coat of wax, buffed to a soft shine, completes the project.

BILL OF MATERIALS

BILL OF MATERIALS

Key

Part

Dimensions

A

top frame

% x 2"

B

half-round molding

C

leg

IX x 1% x 18X*

D

apron

X x 4X"

E

molding strip

x x \w

F

bottom

X" plvwood, ctc.

G

inside trim

X x 14"

H

glass ledge strip

X x X"

I

plate glass

X*

161



Обсуждение
Понравилось?
Войдите чтобы оставить комментарий
Понравилось?