Woodworker's Journal 101-Projects-for-Woodworkers, страница 249




Woodworker

dress). It is of brass and iron construction, furnished with two keys and a trap-door catch. Screw holes are bored and countersunk for =4 screws. The matching escutcheon, model #E22. is made of gauge brass. Drill and mortise the desk top and lift bar as required for installation. Also select an appropriate lock and escutcheon for the kneehole drawer.

Choosing a final finish will depend upon the type of wood used for the desk as well as individual taste; however, it should be done with patience and care. Sand thoroughly, making sure to remove all tool marks.

The original walnut desk was finished with four coats of Deft clear wood finish, with light sanding after the second and fourth coats. For the final coat, a can of Deft spray was used, leaving a fine finish free from brush marks.

BILL OF MATERIALS—DESK TOP

BILL OF MATERIALS—DESK TOP

Pes.

Key Req'd

T

W

L

Back (Figure 8; 1 req'd)

A 2

r

2!4"

\4A

B 3

2 A"

10"

C 1

TA"

41"

D 1

2A"

41"

E 4

w

W

10"

End Panels (Figure 1; 2 req'd)

A 2

2A"

14)4

B 2

TA"

9"

C 2

2lA"

24"

D 2

v

10"

24)4'

E 2

6 A"

24"

Top (Figures 1 and 8)

1

X*

12)4"

49"

Tambours

30

A"

%"

47)4'

Lift Bar

1

2 %"

45 W

242



Обсуждение
Понравилось?
Войдите чтобы оставить комментарий
Понравилось?