Woodworker's Journal 1983-7-5, страница 29

A L.L, HOLES ARC. '/£ C*A.

Fl Q-1 PATTERN R?R f3?UTED> DRAWER PULL

To start, a full size pattern, as shown in Fig, 1, is laid out on a piece of ³/a inch plywood almost as long as the facing board. If the pattern is drawn centered on the plywood, it will be easier to place on the facing board. If the pattern is not centered, you can trim the plywood until centering is established.

Locate and mark centers for the eight Vi inch diameter holes, then center punch and drill them. A saber saw can be used to cut out the waste areas of the design, staying inside the

(continued on next page)

BARRISTER'S! LAWYER'S!! STACKING BOOKCASE!!!

Whatever vou coll it., you con build this beautiful with stacking

each with glass door up and slides back.

No special hardware required.

Step-by-step plant— detailed illustrations.

You have the tools, (table saw and router) All you need is the plan!!!

Order Plan 004 $14 00

Send check or money order to:

About Time Plans, Dept. WJ7-3 7707 Aurora N. f Seattle, WA 98103

Brochure SI.00 refunded with order.

Special Techniques

A ROUTED DRAWER PULL

Drawer pulls can be routed into facing boards which are then fastened to drawer fronts to add a distinctive sculptured look to your chests and cabinet systems. One such pull design is offered here, but this is only one of many possibilities. You can create your own pull designs so that your work will be a most unique personal statement.

lines. Use a file to smooth the saw cuts down to the lines.

Place the pattern board on the back side of a drawer face blank, centered in both directions, and fasten it temporarily with two No. 6 x 1V* inch flat head wood screws. The screw heads should be countersunk so they will not interfere with the routing operation.

Using the pattern board as a guide, drill the eight holes completely through the drawer face as shown in Fig. 2. To minimize splintering on the face side of the work piece, back it up with a piece of scrap and drill at a slow speed. If care is taken in drilling, the pattern board should last for many duplications.

AOOrcss

Rocking Horse Plan

Build this all-time favorite. Size 25 x 36. Full-size plan & accessories kit available. Kit contains vinyl & foam for padded seat, fur fabric for mane Si tail, rings & vinyl for bridle, PLAN—245 ...56.00 ppd. Catalog ...51.00. HA KIT (accessories only) ............59.00 ppd.

ARMOR PRODUCTS P.O.Box 290, Dept. H, Deer Park, NY 11729

EZHEnSZ ~

Do-it-Yourself

SAVE VAST SUMS Build, restore re-finish anything of wood' Here $ everything you need Fine woods veneer s specialty ioo<s Cabine!

hardware, period & modern Pro fin- __

ishes Cane Lamp carts Uphoi supplies Picture moldings Clock kits 100 s ol plans Insiruction books Thousands of hard-to-'ind woodworker products in big new catalog Waif ad for Cafalog & ?0 beautiful Wood Samples

CONSTANTINE e«,i₈U

„ 2014 Eastcltesler RoacS, Bronx. N.Y. 10461

Hcrr's SI. Nfnd ItH pagi- Wixidmirkrr ( atalm onK. r~l S2 cnckmdL Send Moodaurli-r < ma log and 30 Wiyid ¹ Sample. SI.SO refunded on 111 ( alalia nrdtr.

Name

DO-IT-YOURSELF KIT INCLUDES ■2 H"-12 Acmefhreoded rods • 2 tension pins

• 4 specially threaded pivot nuts

* Easy to follow instructions for moking and assembling the jows ond handles from your wood.

ONLY S8.50 :_!BO PER KIT

or send 51 00 relundable I for instruction brochure only Wl residents add sales la* Kit available in CANADA, write for information

THE ROCKLEDGE CO., INC.

Box 56. Dept. J Milwaukee, Wl 53201

KLAMP-KIT

AWSOPENTO 10"