Grind or file away the flat areas under the carriage bolt head so it will turn freely in its counterbore (inset). Then capture it between the bearing blocks permanently with glue and screws.
Guide
(End View)
Workpiece and Stop E
Exploded View
MATERIAL LIST
TxWxl
Tx W x L
1 Base (1)_3/4" x 10" x 12"_ 10 Carriage Bolt (1)_5/16" x 4"
1 Base (1)_3/4" x 10" x 12"_ 10 Carriage Bolt (1)_5/16" x 4"
2 |
Carrier Plate (1) |
3/4" x 9'A" x 10" |
11 Threaded Insert (1) |
5/16" x 18 |
3 |
Guides (2) |
3/4" x VA" x 9'A" |
12 Jamb Nut(1) |
5/16" x 18 |
4 |
Carriage Bolts, Washers (3 PR) |
5/16" x 2" |
13 Adjustment Knob (1) |
2" Dia., Rockier #81498 |
5 |
Hold-down Knob (1) |
2", Rockier #71514 |
14 Workpiece Stop 11) |
3/4" x 2" x 8" |
6 |
Fence Braces (2) |
3/4" x 7V" x 8 |
15 Stop Edging (1) |
3/4" x 3/4" x Varies |
7 |
Fence (1) |
3/4" x 10" x 12" |
16 Knobs (2) |
1" Dia., Rockier #34121 |
8 |
Support Bracket (1) |
3/4" x 2>A" x 12" |
17 Miter Slot Runner (1) |
3/4" x 3/4" x 15" |
9 |
Bearing Blocks (2) |
5/8" x 2" x 8V" |
18 Toggle Clamp (1) |
Steel |
A GUARD SYSTEM YOU'LL ACTUALLY USE.