Woodworker's Journal 2009-33-5, страница 35
Footboard End (Front View) 15V Vh" \ © ( ) 1" 27," R. U,J ' © material list Coffee Table Bed 23030: (4") $37.99 pair Your choice of casters can greatly influence the look of this piece. Remember that the height of the casters you choose will determine the width of the footboard end (piece 3). 35377: (3") $15.00 each 2 Bottom (1) 3 Footboard End* (1) 4 Headboard End (1) 5 Headboard Panel (1) 6 Alignment Pins (2) 7 Strap Hinges (2) Magnetic Varies by style 10 Mattress** (1) 4" x 27" x 75" * Approximate size, depending on caster height " Foam from upholstery shop 37138: (5") $39.99 pair subassembly with glue, finishing nails and clamps, as shown in the photos at left. While the glue cures, mark a centerline on the assembly in order to cut it in half, later. Next, install the casters. Use 2" #8 flathead wood screws to secure the outboard sides of the casters to the bottom and top (piece 2) and rails (pieces 1). You'll have to use 1/2" #8 flathead wood screws to secure the inboard sides of the casters to the plywood, or else these screws would protrude into the bedding area. 38865: (3") ^KT $35.99 pair 30127: $10.50 each Hard-to-Find Wheels The wheels above are available from Woodworker's Journal. To order your supplies, please go to woodworkersjournal.com/Hardware or call 300-610-0333, and mention code WD101. Install the casters using #8 x 2" screws where they mount over the rails and #8 x 3/4" screws where the backing is plywood only. File any tip protrusions smooth. Woodworker's Journal October 2009 1 9 |
