Woodworker's Journal fall-2010, страница 71
Ceramic tiles are an optional table top surface. Slat Layout (Top View) Top Assembly (Top View) Attach the hinges to the same face of the crossbrace frame. Exploded View Position the slats in the frames (start from the centers) before attaching them to the cleats with screws. This will allow you to adjust their spacing. Tx Wx L 2" x 4" (opened) 7 Hinges (4) 8 Slat Stock (1) 3 Edging (2) 9 Long Cleats (6) 8 Slat Stock (1) 3 Edging (2) 9 Long Cleats (6)
6 Dowels or Wooden Plugs (40) 1/2" Dia. 12 Ceramic Tiles (6) Optional * Cut all the slats to fit from 63 lineal feet of material 6 Dowels or Wooden Plugs (40) 1/2" Dia. 12 Ceramic Tiles (6) Optional * Cut all the slats to fit from 63 lineal feet of material material li 1 Legs (4)_ 2 Rails (8) 3 Edging (2) 4 Crossbraces (2) 5 Crossbrace Ends (2) 6 Dowels or Wooden Plugs (40) 7 Hinges (4) 8 Slat Stock (1)* 9 Long Cleats (6) 10 Short Cleats (6) 11 Bolts, Wingnuts, Washers (4) 12 Ceramic Tiles (3) * Cut all the slats to fit from 33 lineal www.woodworkersjournal.com fall 2010 71 Exploded View Optional support for ceramic tile Slat Layout (Top View) st (bench Tx WxL 1 '/a" x3'/2" x 16" 1W' x 2Vz x 153/4" 1 ,/2" x 172" x 5874" 1" x 21/2" x SOW 1" x r/2" x 10" 1/2" Dia. 2" x 4" (opened) 3/4" x 1 3/»" x 33' 3/4" x 3/4" x 1 53/4m 3/4" x 3/4" x 1472" 3/8 x 5" Carriage Optional feet of material |
