Woodworker's Journal Seal-Push-Toy, страница 2
Seal Push Toy Step-by-Step Instructions1. Cut 2" stock (1-3/4" actual) to 6" wide by 10" long. 2. Transfer the grid pattern from the diagram to the stock. 3. Lay out the location of the two 7/16" diameter axle holes and the 1/4" eye hole on the stock. 4. Use a band saw to cut Part A into shape from the stock. 5. Use a drill press to drill the axle and eye holes and the 7/16" diameter hole for Part E. 6. Use a back or dovetail saw to cut the 11/16" slot into the center of Part A by making two parallel cuts to establish the width of the slot (see diagram). |
