Creative Woodworks & crafts 1999-10, страница 53
Patterns Located in Full Size Pattern I Section No. 2! ANTIQUE COMPASS ROSE t>y Liz Tidwell SUPPLIES Wood: baltic birch plywood—one piece 1/4" x 10" x 13"; walnut veneer—one piece 1/4" x 10" x 13" {for backing) Tools; scroti saw with assorted blades including Nos. 2 and 5; drill or drill press fitted with 1/16"~Dia. bit; needle file or sharp knife Temporary-bond spray adhesive Sandpaper, assorted grits Lacquer or finish of choice Standard 10" x 13" frame of choice INSTRUCTIONS Copy the pattern found in Full Size Pattern Section No. 2 and adhere it to the wood. Drill blade entry holes in the waste areas of the pattern, then drill alt of the decorative holes. Cut the pattern to shape, beginning with the center of the design and working your way to the outside edge. Remove the pattern from the wood and sand as necessary. Apply finish of choice according to the manufacturer's instructions and allow to dry thoroughly. I used a lacquer on the compass and frame because it dries so quickly. Next, glue the cut piece the backer. Frame and hang your completed project, taking pride in a job well done! Until next time, happy scrolling! » 53 |
