Creative Woodworks & crafts 2000-04, страница 20

TjBFF rn/mSam

by Rick and Karen Longabaugh

Patterns Located in Full Size Pattern Section No. 1!

INSTRUCTIONS

Cut the pieces to size and sand smooth, then attach the patterns with spray adhesive. Bore blade entry holes in the waste areas of the patterns and make all cuts. Remove the patterns and sand as needed, use the craft knife to clean up any cuts, and apply oil finish of choice according to the manufacturer's instructions.

Once dry, use wood glue to adhere the interior plate design (A) to the rear of the rim design (E). Next, secure the overlays in place with glue. If you prefer a glossy finish, spray with one to three coats of a clear lacquer. Attach sawtooth hanger and display! For more wildlife collector plate patterns, contact The Berry Basket, P.O. Box 925, Centralia, WA 98531; (800) 206-9009. (i

SUPPLIES

Tools: scroll saw with No. 2 or 5 blades

drill with bits Temporary-bond spray adhesive Sandpaper, assorted grits Craft knife Wood glue Oil finish of choice Spray lacquer (optional) Sawtooth hanger

Part Description

Western maple: A Interior plate design B Top overlay C Bottom overlay D Leaf overlays Walnut.

E Rim design

BILL OF MATERIALS

Size in inches Quantity

1/4x6-1/2x6-3/4 1

1/16x2x3 1 1/16x2-1/2x4-1/2 1

1/16x1-1/4x3 4