WttflliffsMCWZti]
WMXf-
Sir mWmWM
|
|
|
BILL OF MATERIALS |
|
|
Part |
Description |
Size in inches |
Quantity |
|
Wood of choice: |
|
|
|
|
A |
Body |
3/16 x 7-1/4x16-1/4 |
1 |
|
B |
Brace |
3/16 x 3-1/2x5-3/4 |
1 |
|
C |
Support |
3/16x4-1/8x4-1/4 |
1 |
|
D |
Vertical trim |
3/16 x 1-1/4x5 |
2 |
|
E |
Horizontal trim |
3/16 x 1/2 x 2-7/8 |
2 |
|
F |
Front shelf |
3/16 x 1 x 3-3/8 |
1 |
|
G |
Rear shelf |
3/16x1 x 3-3/8 |
1 |
|
H |
Middle ring |
3/16 x 5x5 |
2 |
|
1 |
Rib |
3/16 x 1-1/4x3-1/2 |
22 |
|
J |
Front ring |
3/16x3-5/8x3-5/8 |
1 |
|
K |
Back |
3/16x3-5/8x3-5/8 |
1 |
|
L |
Upper ring |
3/16x1-7/8x1-7/8 |
1 |
|
M |
Upper back |
3/16x1-7/8x1-7/8 |
1 |
|
N |
Wide leg |
3/16 x 2-3/8 x 2-3/4 |
4 |
|
0 |
Narrow leg |
3/16 x 2 x 2-3/4 |
4 |
|
P |
Base top |
1/4 x 4-3/8 x 6-1/8 |
1 |
|
Q |
Base center |
3/4 x 4-3/8 x 6 |
1 |
|
R |
Base bottom |
1/4x4-3/8 x 6-1/8 |
1 |
for fit. When satisfied, carefully disassemble all parts. Apply glue to the base top and bottom (P and R). Place the center section (Q) between them, making sure that the pieces are centered. Clamp to dry. Next, glue the feet to the bottom, placinq them as close to the
Note: these must be cut in half on the center line and glued back together in place on the body.
Step 3. Slide the support (C) onto the body, making sure that these pieces are flush.
