Creative Woodworks & crafts 2000-11, страница 30

designed by Liz of Carolina Scrollworks sawn by Warren Kafitz of Belmont, North Carolina

Patterns Located in Full Size Pattern Section No. 1!

SUPPLIES

Wood: wood of choice—one piece 1/2" x 2" x 7" (for the base), one piece 1/2" x 6-1/4" x 4-3/4" (for the | upright) i'

Tools: scroll saw with Nos. 2/0, 2 and 4 blades; drill | with bits (including a 1-3/8"-Dia. Forstner bit); palm sander; router with decorative bit of choice f

Temporary-bond spray adhesive Sandpaper, assorted grits |

Wood glue

One 1-7/16" mini clock insert

Finish of choice I

30 ®

INSTRUCTIONS

Attach pattern to the wood using spray adhesive. Drill all interior holes, then use the Forstner bit to bore a 1-3/8"-Dia. hole 5/16" deep to accept the mini clock insert. Begin cutting, working from the center to the outside.

After all cuts have been made, remove the paper pattern. Using the palm sander, sand the project until smooth. Cut a rectangular block of wood 2" x 7" for the base. Using the router with decorative bit, rout the four upper edges of the base. Sand as necessary. Attach the upright to the base with glue. Apply finish of choice according to manufacturer's instructions. Insert the clock and enjoy! jp

Creative Woodworks & Crafts